My user experience review:
iRoad V7
In-car cameras are the vogue now for any vehicle on the road. It
seems a misnomer to term it as in-car when it’s commonly used not
just in cars nowadays but their class 4 and 5 cousins as well. What
is classified as an accessory is probably a necessity nowadays and
videos of accidents and near-misses often go viral online in a
matter of hours. Such cameras offer valuable video evidence in
cases involving accidents and disputes, which is more than
sufficient to justify investing in a reasonably good unit with
above average video quality.
The iRoad V7 was recently
launched last month. It
replaces the previous flagship 3300 CH with significant
improvements over the latter. One of the most noticeable change is
the video quality which is much improved with a 2.3 megapixel CMOS
sensor and HD 1280×720
/ 30fps quality in both front and rear cameras.
Compared
to its predecessor, the new V7 comes with improved 132-degree wide
lens which provide clearer video quality and a more powerful A20
dual core CPU. Not the best in the market but nonetheless still an
improvement.
Bucking the trend of the cylindrical design, the V7 has taken on
the conventional rectangular form. The front has a glossy surface
which is a fingerprint magnet; not so much a problem as it would
rarely be handled and the back surface is matte which gives the
whole unit a rather sophisticated feel.
The rear camera remains a small
cylindrical form able to rotate 360 degrees.
What
you get out of the box:
http://i36.photobucket.com/albums/e34/emailbenlim/unpack2_zps801ff02c.jpg
Clockwise from left:
Wireless
USB dongle
16 GB
micro SD card
Rear
Camera
Front
Camera
Cigarette
Charger
Uninterrupted
fuse cable
Front and
rear USB cable
Also included were transparent cradles and spare double sided
tapes.
Setting up was a breeze, simply attach the wires, plug in the
cigarette socket and you’re good to go. If you are a neat freak, go
to a car audio workshop for hassle free installation and
concealment of the wires for a small fee.
Front Cam mounted
http://i36.photobucket.com/albums/e34/emailbenlim/2014-11-16230753_zps62531f0e.jpg
Rear Cam:
http://i36.photobucket.com/albums/e34/emailbenlim/2014-11-16230654_zps83c937bd.jpg
From unpacking to actual utilisation, it took me about 30 minutes.
Once powered up, you hear the voice guidance which ensures that the
unit was working and when the unit started recording along with
alerts during impact when you turn on the particular mode. There
are the usual 3 recording modes:
Normal Recording- Uninterrupted recording is initiated once the
engine is turned on.
Impact Recording- Recording initiated when the impact sensor
detects any impact.
Motion
Recording- Parking mode is initiated
when a car is stationary for 10 minutes and return to driving mode
once the car is on the move. Select motion detection on the
settings if you want to record only when motion is detected while
parking
Examples of front/ rear recordings from a variety of different
driving environments
Daytime on the road
http://i36.photobucket.com/albums/e34/emailbenlim/day1_zps9e33fb85.png
Daytime with rain
http://i36.photobucket.com/albums/e34/emailbenlim/rain1_zpsb587e51e.png
Night driving
http://i36.photobucket.com/albums/e34/emailbenlim/night1_zpsd8983b9f.png
Links to some videos:
Daytime Driving: http://youtu.be/GI3mto9SLrg
(front), http://youtu.be/EGKbNWhwSPU
(rear)
Night Driving: http://youtu.be/WwJuUAztYD8
(front), http://youtu.be/ITKWFJ-I75A
(rear)
Raing Driving: http://youtu.be/Eyd2dVSU_Xs
(front), http://youtu.be/EecGfGqCtPM
(rear)
A 16 GB micro SD card was
supplied although the unit can support up to 64 GB. Live recordings
can be viewed wirelessly via a smartphone app with internet
connectivity. There is no need to remove the memory card or for an
in-built LCD screen to watch the recorded video. The iRoad app
allows easy viewing of images via your smartphone and is available
on both Android and IOS platforms. Firmware upgrades are
automatically done via Wifi.
Screenshots from my Android
phone during Setup:
http://i36.photobucket.com/albums/e34/emailbenlim/2014-11-18180802_zps17a4f7b9.png
PC setup was just as easy. The micro SD card contained the
installation file. Simply plug in and run .exe file.
The dedicated PC
viewer has plenty of functions which enable you to draw traffic
lanes onto the videos, calibrate night recordings, play back video
recordings in various forms.
Full
Specifications
Model
IROAD V7 Wi-Fi
Image Sensor
2.3Mega Pixel CMOS Images
Sensor
Resolution/Frame/Viewing
angle
Front:1280×720 / 30fps , Rear:1280×720 /
30fps , 132Degrees
Wi-Fi
External WIFI supported – Smartphone
playback and settings, firmware auto-update
Wi-Fi button
Smartphone registration standby mode
On/Off, Voice recording On/Off
Audio Input
Microphone embedded
Video/Audio Compression
H.264 / ADPCM
Vibration sensor
3 axis acceleration sensor (recording
initiated by external impact)
Voice Guidance(speaker)
Effect sound for informing operational
status and voice guidance supported
External GPS Sensor
Synched with google map, keep track of
location and travelling speed
Storage Medium
Micro SD 4GB ~ 64GB (recommended type MLC
Class10)
Recording Modes
Uninterrupted(driving)mode,
Event(impact)mode, Parking(motion detection) mode, Voice
recording
Constant Power(low voltage
cut-off)
Constant power(low voltage cut-off) :
constant power(low voltage cut-off) function
embedded
Power
DC 12V ~ 24V
Operating
temperature/Humidity
-20 ~ 70 C (storage temperature : -20 ~ 90
C) / 10 ~ 95%
Viewer
IROAD V7 dedicated viewer: Windows Xp,
VISTA, Win7, Win8 (32Bit ~ 64Bit supported)
Apps
IROAD App(Android 2.3 and higher version,
iOS 5.0 and higher version)
The in car camera market is crowded with
many models and one would be spoilt for choice.
Having gone through the spectrum of cheap
China made ones costing less than $50 bucks, intermediate range
(Marbella MX5), it was my first time using a rear camera. Daytime
video quality was satisfactory while night quality was a tad below
expectations. Still, the iRoad V7 at the current list price of $329
is value for money for a front/rear bundle compared to other
similar offerings made in Korea. Corvit International will be appearing at booth
5E46 in SITEX 2014 happening at Expo from 27 – 30 November
2014. Look out
for promotional pricing and for purchases made during the
exhibition period, skilled Corvit technicians from Korea will be
available on-site to install the car cameras.
Evaluation
Design: 8/10. I still prefer the
cylindrical design for the smaller
footprint
Specs: 8/10 it’s not exactly full HD
resolution.
Installation: 9/10. Easy to set
up
Ease of use: 9/10. Wi-Fi function which can
control just about everything has user friendly
interface
Video Quality: 7/10. Disappointed with night video quality especially
from the rear cam.
Overall Experience: 8/10. Would consider
this as a serious alternative over more expensive made in Korea
competitors