How to damage your PS4 & get your hard drive adjust to the
perfect setting?
1)Go to setting of your PS4
2)Find the word "Initialize" & activate it
3)During initialize,use controller to cancel the process
4)Test if you can use USB device on your PS4
5)If the error code is SU-30627-8,you have succeeded.
6)You tell Funan servicing centre,that the hard drive is not
seated properly.
SU-30627-8=Missing screw or hard drive not seated properly
Maybe,someone tampered with the PS4 screw & keep the PS4
screw at home.
If the Sony servicing centre ask you,you must say:"I run out of
options & I saw someone writtened in the internet,that
initialize PS4 can solve some of the problem.
Some reasons for you to tell Sony servicing centre,that it isn't
your fault.
1)When I was initializing my PS4,my dog jump on me & my PS4
don't know why.....
You tell her,that next time you will pull the controller out of
the USB cable & place it inside your drawer.
2)When I was waiting for PS4 to be initialized,the power bar
become red & turn off by itself.
3)The main switch of your house power supply was triggered.
When I estimated my PS4 will be initialized within 5mins,I
switch on my modem & surfer,then I think there is an
overloading of power & the main power switch was triggered.
Surfer=Singtel
Modem=Aztech
Surfer=1 plug
Modem=1 plug
MIO TV=Output of your modem
TV=1 plug
PS4=1 plug
DVD player=1 plug
Amplifiers=1 plug
Speakers=Output of your amplifiers
All the 2 & 3 pins plugs=Input is 240V
6×240V=1440V
So much plugs used on a 4 × 3 pins plugs device,the percentage
of overload is quite high.