From Their Exhaust . . . To Your
Lungs!
Did You Know...
It used to be that cars and trucks had separate fresh air intakes
that allowed air to pass directly from the front of the vehicle to
the passenger compartment. Today, other than through windows, there
is usually only one way for fresh air to enter your car--through
the auto ventilation system, which includes the auto air
conditioner. Therefore, all the air that enters your car flows
through an evaporator core very similar to the one below.
When you run your ventilation system either for heating or cooling,
air passes through the evaporator core.
When cooling, moisture from the air is removed by the evaporator
core. This moisture accumulates in the evaporator core chamber
where most of it is dumped to the ground through a drain. However,
some water may still remain. In other words, the chamber and the
evaporator can stay wet. Because this area is dark, wet and
inevitably dirty, these are IDEAL BREEDING CONDITIONS for mold and
mildew to flourish!
When heating, although you have dry conditions. Spores and other
fine debris that have accumulated are continually being blown into
your enclosed driving environment. In addition, external air
carries all kinds of material with it as it enters your vehicle
including dust, oil droplets, exhaust vapors, insects, mold spores,
pollens and bacteria. This debris accumulates on the evaporator
core. Under such conditions, mold and bacteria colonies are
nurtured and further contaminate the air in the vehicle. Look at
the accumulation of debris in the illustration below. This can
happen in a very short time!
DWD2 Refresher
A 7 oz. can of cleaning solution much like the Evaporator Cleaner.
Designed for the purpose of allowing you to maintain a cleaner
evaporator environment after the initial cleaning with the 9 oz.
cleaner. You can do this easily by injecting the Refresher
Treatment through the adapter that becomes a permanent fixture with
the initial cleaning. The adapter is placed at a convenient
location under the dashboard or under the hood (depending on your
vehicle) where you can easily use the Refresher Treatment as often
as you need. A single can will last up to 6 months, depending on
use.
Image : http://www.dwd2.com/docs/images/before.jpg
Before DWD2
If your vehicle smells like dirty socks or a damp basement, your
personal environment is CONTAMINATED. When you or a mechanic sprays
air freshener into the vents or inside the vehicle, you only MASK
the odor. The contaminants still remain. Nothing has been
solved.
Image : http://www.dwd2.com/docs/images/during.jpg
During DWD2
The cleaning solution must be able to reach the entire evaporator
core starting from the intake side. To accomplish this you can?t
just spray something into the chamber. The cleaning material must
fill the chamber from top to bottom. In a liquid form this is
impossible. The liquid would flow through the bottom of the
evaporator and out the drain. Therefore, we must use foam. The foam
fills the chamber when it is injected and then the fan blows the
CLEANING FOAM through the entire evaporator and pushing the debris
along with it.
Image: http://www.dwd2.com/docs/images/after.jpg
After DWD2
It is quick and easy! The photo is the same evaporator as above
after being cleaned with DWD2 Evaporator Cleaner. Its obvious, if
your evaporator core doesn?t look like this, you and your
passengers will be breathing contaminated air. You may only smell
it while using the air conditioner, but until you flush it out, it
can affect your health all year long. Protect yourself, schedule a
cleaning with DWD2 Evaporator Cleaner at least twice each
year.
Frequently Asked
Questions:
How often do I have to get my evaporator
cleaned?
This depends. If you live in the Midwest where mold concentrations
appear to be the highest, then you may need to have it cleaned more
frequently about 3 to 4 times a year. If you live in the
southwest, where it is dryer, then twice a year is probably enough.
Take a look for yourself by pressing the CNN.Com button to the
right.
I can't seem to find someone in my area that carries your product
and I need to have this service done to my car, what should I
do?
Please feel free to contact us directly. You can buy the product
from us complete with instructions that you can give to your
mechanic. Have them take a look at our web site or contact our
sales department for information about how they can obtain this
product for all their customers. We are building a national
distribution network, but we don't have every area covered
yet
Can I clean my own evaporator?
We recommend that a mechanic or A/C technician do the installation.
Although Installation is simple and most vehicles use similar
systems, there are differences. Part of the installation requires
drilling a 3/16 hole in the casing between the evaporator and the
fan. It is important that the installer be familiar with the
location and design of the ventilation system in your vehicle. Once
the DWD2 SYSTEM is installed, however, you can certainly clean your
own evaporator.
What about injecting the cleaner into the evaporator drain
hole?
DWD2 Evaporator Cleaner system is designed to reach the evaporator
between the fan and the evaporator. This is where the greatest
accumulation of debris occurs. If you inject the foaming solution
into the drain hole, all the solution may not reach the
contaminated side of the evaporator and only do a partial cleaning.
Once the injection system is properly installed in your car, future
cleaning is very simple. We also provide a DWD2 Refresher cleaner
that can be used through the same injector system.
*Double Click On Image To Enlarge For Reading
!!!!
Usual Price @ S$35.00 , Now @
S$30.00
SMS @ 98572328 or PM to : [email protected]
Interested in making Extra Income,
Distribution, Export, send your enquiry : [email protected]