Erm.,.. i'm really sry but i dun understand.. .can you help me
?
Basically, what you need to do beforehand is to set up a static IP address for each computer
connected to a network so that you don't have to change the
QoS settings frequently as you would if they are dynamic. Follow
the guide below, and if you have any problem with it, specify which
step you are stucked at.
http://portforward.com/networking/static-xp.htm
One thing to note is that at Step 9, regarding the "Preferred DNS Server" and "Alternate DNS Server" settings, you
should use the following values, depending on your ISP.
Singnet
Preferred: 165.21.83.88
Alternate: 165.21.100.88
Starhub
Preferred: 203.116.1.78
Alternate: 203.116.254.150
And the IP address assigned to
each computer must be unique.
After setting up the static IP address for each computer, follow
the second link in my previous post to set up the QoS rules. To get
you started, here's an example:
If you wish to give priority to a particular computer which you
have assigned a static IP address of 192.168.0.101 earlier on, just add a
rule like:
Name: Teh pwnz0r
compewta
Priority: 1 (the smaller
the number, the higher the priority)
Protocol: Both
Local IP Range: 192.168.0.101 to 192.168.0.101
Local Port Range: 0 to
65535
Remote IP Range: 0.0.0.0 to
255.255.255.255
Remote Port Range: 0 to
65535
Then maybe you have another computer, which is assigned the IP
address of 192.168.0.102,
and you would like to give priority to it for the connection
bandwidth, but not before the computer above. So you would
create a new QoS rule
but use a higher
value in the Priority field, with everything else the same, like
this:
Name: Teh not-so-pwnz0r
compewta
Priority: 2
Protocol: Both
Local IP Range: 192.168.0.102 to 192.168.0.102 (don't forget to replace
.101 with .102, since this QoS rule is for the second computer
now)
Local Port Range: 0 to 65535
Remote IP Range: 0.0.0.0 to 255.255.255.255
Remote Port Range: 0 to 65535
Let me know if you have any other questions.