i not so sure wat is this leh can some one tell mi?
Game commands:
Here is a table of the rate settings recommended for use with
their
corresponding connections:
14.4 Modem Get a new modem
28.8 Modem 2500 to 3000
33.6 Modem 2900 to 3900
56k Modem/1 Channel ISDN 3600 to 5300
2 Channel ISDN 5000 to 7000
Cable Modem 5600 to 10000
xDSL, T1+ 7500 to 20000
LAN (10MBps or 100MBps) 20000
Source: Tweak 3d
I recommend that when playing ANY game online that ALL of the
games
detail settings are on low, and this will help ping as well.
The following commands only work in Half-Life, and not other games
such
as Quake. I recommend that you all download the FULL Half-Life
patch and
the FULL Counter-Strike. Uninstall Half-Life and then re-install
again, and
use the FULL patches.
I personally use the following settings. Just open up your
config.cfg file in
notepad.
This command sets up the rate at which your modem sends and
receives
data:
rate "5300"
Enable MMX with the following command if your CPU supports
it:
r_mmx "1"
These commands affect Half-Life's visual performance, and in some
cases
improve ping:
r_decals "300"
r_dynamic "1"
r_drawviewmodel "1"
r_shadows "0"
gl_texsort "0"
gl_texturemode "GL_LINEAR_MIPMAP_LINEAR"
precache "1"
fps_max "30"
cl_himodels "0"
gl_polyoffset "20"
These commands turn joystick support off and mouse filter on,
for
smoother mouse movement:
joystick "0"
m_filter "1"
This sets how fast the console comes down:
scr_conspeed "3000"
These commands turn of view bobbing when running, and improves
most
peoples aim (NOTE: This is NOT cheating):
cl_bob "0"
cl_bobup "0"
cl_bobcycle "0"
In Counter-Strike (CS Only) set the following value to 1 if your
machine
slows down when rendering a smoke bomb. You could also try setting
it
to 2 for an even further performance boost:
fastsprites "0"
The value of the pushlatency command should be:
-3/4 of your ping
So if you have an average ping of 180, you'd set it to:
-90
These commands set up your player prediction:
cl_nopred "0"
cl_predict_players "1"
cl_resend "2"
pushlatency "-35"
These commands turn downloading and uploading of player logos off.
This
improves ping considerably:
cl_allowdownload "0"
cl_allowupload "0"
cl_download_ingame "0"
These commands set up your sound ingame. If your running a
sound
blaster Live card or something that supports EAX, set the EAX value
to 1.
I'd recommend leaving reverb on for all sound cards (So you can
hear
echoes):
s_a3d "0"
s_eax "1"
s_reverb "1"
This command turns the netgraph on:
net_graph "1"
There will now be a graph at the bottom of your screen - this is a
net
graph. It shows your connection and how good/bad it is, similar to
the
graph in Quake 3. When you're not monitoring your internet
connection,
to improve your FPS use this command instead:
net_graph "3"
If you're on a Dial Up Modem (e.g a 56k) replace X in the following
line
with 20. If you're on ISDN or faster replace X with 30. Once
you've
replaced X with 20 or 30 add the line to your config file.
cl_updaterate "20"
For modem users, set the following to 30. If you're using ISDN or
higher,
set the value to 40:
cl_cmdrate "30"
These commands set how long text messages are displayed:
hud_saytext_time "20"
hud_deathnotice_time "10"
This command enables fast switching. For example, in
Counter-Strike, with
this command enabled all you need to do to switch to the knife is
press 3:
hud_fastswitch "1"
These commands are, in my opinion, the most important to add.
These
change some of the settings so that the client side controls them.
These
settings default to on. To change them to server side (like how the
old
netcode worked) change them to 0:
cl_lc "1"
cl_lw "1"
cl_lb "1"
To get some cool affects that may mess up your framerate/ping, type
the
following into the console (Counter-Strike only):
gunsmoke
So, once I've set all of my commands up I add the following to my
config
file:
rate "5300"
r_mmx "1"
r_decals "300"
r_dynamic "1"
r_drawviewmodel "1"
r_shadows "0"
gl_texsort "0"
gl_texturemode "GL_LINEAR_MIPMAP_LINEAR"
precache "1"
fps_max "30"
cl_himodels "0"
gl_polyoffset "20"
joystick "0"
m_filter "1"
scr_conspeed "3000"
cl_bob "0"
cl_bobup "0"
cl_bobcycle "0"
fastsprites "0"
cl_nopred "0"
cl_predict_players "1"
cl_resend "2"
cl_allowdownload "0"
cl_allowupload "0"
cl_download_ingame "0"
pushlatency "-135"
s_a3d "0"
s_eax "1"
s_reverb "1"
net_graph "3"
cl_updaterate "20"
cl_cmdrate "30"
hud_saytext_time "20"
hud_deathnotice_time "10"
hud_fastswitch "1"
cl_lc "1"
cl_lw "1"
cl_lb "1"
These commands only work in Unreal Tournament. For better
internet
play, select 16 bit colours and low on both skin and world detail
in
preferences. Also, turn view bobbing off. The netspeed command
alters
the rate at which your modem sends/receives data. Press the tab
key
and then enter:
netspeed 5300
netstat
These commands only work in Quake 3 Arena. For the best internet
play,
in the video options set everything onto low. The rate command
alters
the rate at which your modem sends/receives data. Bring down
the
console and enter these commands, or add them onto the bottom of
your
config file:
The following command alters the rate at which your modem
sends/receives data:
rate "5300"
This command alters your maximum FPS:
com_maxfps "30"
The value of the cl_timenudge command should be:
-3/4 of your ping
So if you have an average ping of 180, you'd set it to:
-135
These commands set up your connection:
seta snaps "30"
seta cl_maxpackets "30"
seta cl_packetdup "1"
cg_nopredict "0"
seta cl_timenudge "-135"
cg_deferPlayers "0"
This command enables the netgraph:
cg_lagometer "1"
So once I've set all of my settings up, I add the following to my
config:
rate "5300"
com_maxfps "30"
seta snaps "30"
seta cl_maxpackets "30"
seta cl_packetdup "1"
cg_nopredict "0"
seta cl_timenudge "-135"
cg_deferPlayers "0"
cg_lagometer "1"
Install the Quake 3 Arena 117 dll's for a performance boost. When
looking
for servers, use Arena Spy.
These commands only work in Quake 2 and Soldier Of fortune:
The following command alters the rate at which your modem
sends/receives data:
set rate "5300"
This command sets your maximum FPS:
set cl_maxfps "30"
This command turns the netgraph on:
set netgraph "1"
So once I've set all of my settings up I add the following to my
config file:
set rate "5300"
set cl_maxfps "30"
set netgraph "1"
------------------
~~~~~~~~~~~~
elite*9.mm*
an infantry who tink highly of mirage corps