Questions, suggestions, and general discussions

last SG · 2009-12-10T23:13:06+00:00

Airport Express Line works, only if you ignore that "one and only" error.

Veyron16.4 SG

Can I ask some questions:

1: How come the BVE route from HK having a "maximum speed limit" of 25 (When Ctrl + T to show timetable in default) and obviously I dont drive at such a low speed which then there is no penalty for speeding there. For Singapore routes that are developed by you guys, the speed limit is imposed there and works. (Is this a matter of BVE 4 & OpenBVE issue)

2: How come in the North South Line BBT - SBW, there are at times where I did not change the power notches, get penalty for passengers discomfort?

3: How come in few of the BVE HK route that was designed for BVE 2, there seemed to always have a train in front and not possible to drive? (E.g: Airport Express in HK)

4: How many power and braking notches are there in C151, both real world and BVE trains.

5: What is the use of ATC / ATS / ATS-P in the (open) BVE, interestingly, in BVE 2, the ATS is enabled by default while OpenBVE requested me to activate ATS and BVE 4 fails miserably. (The route was MTR TKLTseung Kwan O Depot, designed for BVE 2.6 which can be get at here: http://bvehk.net/plugin.php?identifier=download&module=download&acti=softview&softid=111)

4. In the real world, a C151 has 3 Power notches and 4 braking notches while in openBVE, a C151 has 4 Power notches and 3 braking notches.

E5 SG

4. In the real world, a C151 has 3 Power notches and 4 braking notches while in openBVE, a C151 has 4 Power notches and 3 braking notches.

Correction: In real world, the 0, 200 and 300 series train have 4 power notch, 3 service brake notch and 1 emergency brake notch. So meaning it includes

EB, B3, B2, B1, N, P1, P2, P3,P4

SBS7322B SG

Can I ask some questions:

2: How come in the North South Line BBT - SBW, there are at times where I did not change the power notches, get penalty for passengers discomfort?

3: How come in few of the BVE HK route that was designed for BVE 2, there seemed to always have a train in front and not possible to drive? (E.g: Airport Express in HK)

4: How many power and braking notches are there in C151, both real world and BVE trains.

1. The HK developer made an error. Don't be so calculative.

3. The AEL train (A-Train) has an error of a 5000 secs delay. You are required to edit the train.dat file. Please search BVEHK for the answer as I have forgotten the thread.

SBS7322B SG

My website is finally working!!

Link: http://jerrysite08.zxq.net/

It's made with Joomla!.

Why no have my train one. So bad.

jerryonhere SG

Why no have my train one. So bad.

Haven't finish mah ;)

jerryonhere SG

Haven't finish mah ;)

Done!

Samuel Lee SG

Correction: In real world, the 0, 200 and 300 series train have 4 power notch, 3 service brake notch and 1 emergency brake notch. So meaning it includes

EB, B3, B2, B1, N, P1, P2, P3,P4

Based on his post, I hereby release a C151 train that corrects from 4 service brake notch to 3 and 3 power notch to 4

Details can be downloaded from here:
http://www.sgforums.com/forums/3146/topics/375827?page=5#post_9655193
(Link to C151 development updates)

"Official" download site (PS: I did not change any copyright notice, only the power/brake notchs are edited and nothing more) :

Notice: New links at below:

http://sites.google.com/site/eastwestlinesg/file-cabinet/C151Unofficial0.6.5MidRelease.7z?attredirects=0&d=1

I have just changed the hosting service. No updates has made. So people who previous have the patch version may keep it. (Nothing need to be done)

flightsimmer SG

Hey!! just a random question, anyway to disable the auto door close function? i like to manual open and close the doors, more fun.. anyway to disable it? thanks!

kenneth1228 SG

Hey!! just a random question, anyway to disable the auto door close function? i like to manual open and close the doors, more fun.. anyway to disable it? thanks!

http://openbve.trainsimcentral.co.uk/common/tool_traineditor.zip

Download this and extract it into your OpenBVE Folder.

http://openbve.trainsimcentral.co.uk/common/tool_traineditor_source.zip

This is needed for your settings for train editor, extract this into your TRAINEDITOR

File.

When you finish downloading and extracting everything, Run TrainEditor in your

OpenBVE Folder. Then click Open at

the left side, then ignore the pop up of 'Do you want to save the data before opening

another train', then go to your C151 folder and find the C151 train.dat file. Click on it

and you will get the properties, go to Properties(2) by clicking on the tab on the top of

the TrainEditor, look at the right side of the page named 'Device', you should see

'DoorsOpenMode' and 'DoorsCloseMode', they were in Semi-Automatic for both, so

change them to 'Manual', and you are done!

Kenneth1228, editor of trains

joeyfjj SG

Even a mod does this by accident... Repeat post: deleted.

joeyfjj SG

http://openbve.trainsimcentral.co.uk/common/tool_traineditor.zip

Download this and extract it into your OpenBVE Folder.

http://openbve.trainsimcentral.co.uk/common/tool_traineditor_source.zip

This is needed for your settings for train editor, extract this into your TRAINEDITOR

File.

When you finish downloading and extracting everything, Run TrainEditor in your

OpenBVE Folder. Then click Open at

the left side, then ignore the pop up of 'Do you want to save the data before opening

another train', then go to your C151 folder and find the C151 train.dat file. Click on it

and you will get the properties, go to Properties(2) by clicking on the tab on the top of

the TrainEditor, look at the right side of the page named 'Device', you should see

'DoorsOpenMode' and 'DoorsCloseMode', they were in Semi-Automatic for both, so

change them to 'Manual', and you are done!

Kenneth1228, editor of trains

That's the source code - it's not needed... You only need the first link.

flightsimmer SG

http://openbve.trainsimcentral.co.uk/common/tool_traineditor.zip

Download this and extract it into your OpenBVE Folder.

http://openbve.trainsimcentral.co.uk/common/tool_traineditor_source.zip

This is needed for your settings for train editor, extract this into your TRAINEDITOR

File.

When you finish downloading and extracting everything, Run TrainEditor in your

OpenBVE Folder. Then click Open at

the left side, then ignore the pop up of 'Do you want to save the data before opening

another train', then go to your C151 folder and find the C151 train.dat file. Click on it

and you will get the properties, go to Properties(2) by clicking on the tab on the top of

the TrainEditor, look at the right side of the page named 'Device', you should see

'DoorsOpenMode' and 'DoorsCloseMode', they were in Semi-Automatic for both, so

change them to 'Manual', and you are done!

Kenneth1228, editor of trains

Thanks!

flightsimmer SG

Haha, one more, is there a way to disable the announcements? for door closing oni. hahs

joeyfjj SG

Haha, one more, is there a way to disable the announcements? for door closing oni. hahs

NSL? Quick, but illegal method: rename the departing.wav file from the openBVE\Railway\Sound sl\announce folder. It will tell you there's a file missing, but there's no door closing announcements!

Samuel Lee SG

Just a note to my C151 modded version:

U Do NOT need an pre-existing C151 train to work and Willis did mentioned that his testing version of a new release (Presumely 0.7), which I have no access of (Since I am not yet a developer, currently tested by the developers) has inclusive of such mods.

So I will be holding this update / modded train for a moment until Willis released his new train, which he did not state approximately by when it can be finished.

joeyfjj SG

Just a note to my C151 modded version:

So I will be holding this update / modded train for a moment until Willis released his new train, which he did not state approximately by when it can be finished.

Samuel: Maybe you can continue updating at the C151 thread - this is a Question/Q&A thread...

Samuel Lee SG

Samuel: Maybe you can continue updating at the C151 thread - this is a Question/Q&A thread...

Ok, with the talks / clarification is everything done, all discussion on my C151 train will go to C151 thread at http://www.sgforums.com/forums/3146/topics/375827?page=5#post_9655193

joeyfjj SG

Ok, with the talks / clarification is everything done, all discussion on my C151 train will go to C151 thread at http://www.sgforums.com/forums/3146/topics/375827?page=5#post_9655193

Thank you. Any more QUESTIONS? <No longer off-topic!!!>

Samuel Lee SG

I got a question:

The below List of Developers was locked

http://www.sgforums.com/forums/3146/topics/388986

And the above did redirect to the Sticky part which has expired. I am wondering how can a mod update in a expired thread?

joeyfjj SG

I got a question:

The below List of Developers was locked

http://www.sgforums.com/forums/3146/topics/388986

And the above did redirect to the Sticky part which has expired. I am wondering how can a mod update in a expired thread?

Done. I swopped them around. Use the "new" thread at http://www.sgforums.com/forums/3146/topics/388986.

« Previous Page Next Page »